708-425-9080
Meyer Tool & Mfg.
  • Services
    • Engineering Services >
      • Pressure Vessel Design
      • Vacuum Chamber Design
      • Cryogenic System Design
    • Machining Services >
      • CNC Milling
      • Lathe Turning
    • Welding Services >
      • ASME Code Welding
      • Aluminum Welding
      • Brazing and Soldering
      • Precision Welding Services
    • Assembly / Testing Services >
      • Helium Leak Testing
      • Pneumatic Pressure Testing
      • Hydrostatic Pressure Testing
      • Electrical Wiring / Sensor Testing
      • Cold Shock Testing
      • Precision Cleaning
      • Dye Penetrant Testing
  • Products
    • Vacuum Products >
      • Custom Vacuum Chamber >
        • Custom Aluminum Vacuum Chamber
        • Custom Stainless Steel Vacuum Chamber
        • Custom Exotic Material Vacuum Chamber
      • Custom Combination Pressure and Vacuum Chamber
    • Pressure Products >
      • Custom ASME Code Pressure Vessel
      • Non ASME Code Pressure Vessels
      • Custom ASME B31.3 Piping Systems
    • Cryogenic Products >
      • Custom Cryostats / Dewars >
        • Custom Aluminum Cryostats / Dewars
        • Custom Stainless Steel Cryostats / Dewars
      • Custom Cryogenic Distribution Boxes / Cold Boxes
      • Custom Heat Exchangers
      • Custom Cryogenic Thermal Shrouds and Shields
    • Machined Products >
      • Precision Mechanical / Electrical Assemblies
      • Custom Precision Machined Parts
      • Radio Frequency Components
    • MLI - Multi Layer Insulation
  • Experience
    • Customers / Industries >
      • Oil and Gas Industries
      • Aerospace Industry
      • Nuclear Industry
      • Coatings Industry
      • Semiconductor Industry
      • Astronomy Telescope Industry
      • Engineered Diamonds Industry
      • National Laboratories
      • Research Universities
      • Advanced Industrial Process Customers
      • CBD and Essential Oils
    • Customer Testimonials
  • Learning Center
    • Fabrication Tips
    • Newsletters >
      • Newsletter Signup
      • Newsletter Archive
    • Articles >
      • Custom Fabrication General Interest
      • Custom Cryogenic Technology
      • Custom Vacuum Chambers
      • Custom Pressure Vessels
  • About
    • Celebrating 50 Years
    • Why Us?
    • VIdeo Archive
    • Photo Gallery
    • Careers
  • Contact
    • Newsletter Signup
  • Services
    • Engineering Services >
      • Pressure Vessel Design
      • Vacuum Chamber Design
      • Cryogenic System Design
    • Machining Services >
      • CNC Milling
      • Lathe Turning
    • Welding Services >
      • ASME Code Welding
      • Aluminum Welding
      • Brazing and Soldering
      • Precision Welding Services
    • Assembly / Testing Services >
      • Helium Leak Testing
      • Pneumatic Pressure Testing
      • Hydrostatic Pressure Testing
      • Electrical Wiring / Sensor Testing
      • Cold Shock Testing
      • Precision Cleaning
      • Dye Penetrant Testing
  • Products
    • Vacuum Products >
      • Custom Vacuum Chamber >
        • Custom Aluminum Vacuum Chamber
        • Custom Stainless Steel Vacuum Chamber
        • Custom Exotic Material Vacuum Chamber
      • Custom Combination Pressure and Vacuum Chamber
    • Pressure Products >
      • Custom ASME Code Pressure Vessel
      • Non ASME Code Pressure Vessels
      • Custom ASME B31.3 Piping Systems
    • Cryogenic Products >
      • Custom Cryostats / Dewars >
        • Custom Aluminum Cryostats / Dewars
        • Custom Stainless Steel Cryostats / Dewars
      • Custom Cryogenic Distribution Boxes / Cold Boxes
      • Custom Heat Exchangers
      • Custom Cryogenic Thermal Shrouds and Shields
    • Machined Products >
      • Precision Mechanical / Electrical Assemblies
      • Custom Precision Machined Parts
      • Radio Frequency Components
    • MLI - Multi Layer Insulation
  • Experience
    • Customers / Industries >
      • Oil and Gas Industries
      • Aerospace Industry
      • Nuclear Industry
      • Coatings Industry
      • Semiconductor Industry
      • Astronomy Telescope Industry
      • Engineered Diamonds Industry
      • National Laboratories
      • Research Universities
      • Advanced Industrial Process Customers
      • CBD and Essential Oils
    • Customer Testimonials
  • Learning Center
    • Fabrication Tips
    • Newsletters >
      • Newsletter Signup
      • Newsletter Archive
    • Articles >
      • Custom Fabrication General Interest
      • Custom Cryogenic Technology
      • Custom Vacuum Chambers
      • Custom Pressure Vessels
  • About
    • Celebrating 50 Years
    • Why Us?
    • VIdeo Archive
    • Photo Gallery
    • Careers
  • Contact
    • Newsletter Signup

Call: 708-425-9080

Picture
more Newsletters
Picture

​Meyer Tool attends the 2011 Particle Accelerator Conference (PAC '11)

April 20, 2011
Picture2011 Particle Accelerator Conference- BNL.gov
Meyer Tool & Mfg., Inc. enjoyed participating in the 2011 Particle Accelerator Conference (PAC ’11) which took place in New York City from March 28 to April 1, 2011. PAC ’11 was set against the backdrop of the beautiful Marriot Marquis, a hotel located in the heart of bustling Times Square and known for their innovative elevator system, among other amenities. This exciting venue allowed Meyer Tool’s Ed Bonnema and Eileen Cunningham to experience delicious meals, entertainment and, of course, a little shopping after show hours. Thanks to Stuart Koch of Amuneal, Eileen even tasted matzo ball soup for the first time ever! And all we can say is “Wow!” Times Square really is in motion 24/7!

PAC ’11 was hosted by Brookhaven National Laboratory (BNL), and jointly sponsored by the IEEE Nuclear & Plasma Sciences Society and the APS Division of Physics of Beams. Meyer Tool would like to give a special thanks to Doreen Cantelmo of BNL for all her planning efforts this year. Doreen was our contact for PAC ’11 and did a great job on the Local Organizing Committee for Industrial Exhibits. PAC conferences are organized to attract accelerator scientists, engineers, students and industrial exhibitors interested in every aspect of the science and technology of particle accelerators. To that end, they achieved their mission. Despite national budget uncertainty, there were approximately 880 attendees and 162 conference exhibitors and enough conservative optimism to go around. As always, it was impressive to see the number of students involved in accelerator science. We can be optimistic about America’s future as our higher education system and our scientific communities continue to engage bright minds with bright ideas!

Speaking of bright ideas, during Tuesday’s poster session, Meyer Tool presented our poster on the “Fabrication of the Jefferson Laboratory Cryogenic Control Reservoirs” (CCRs). Meyer Tool is manufacturing six (6) CCRs (cryogenic distribution boxes designed by JLab) as part of the 12 GeV upgrade to the CEBAF accelerator. They include internal reservoirs in order to provide a continuous supply of liquid helium and liquid nitrogen to superconducting magnets through periods of disruption in the external supply. The paper discusses the manufacturing and process measures that we implemented in order to meet DOE requirements for pressure vessels, to eliminate brazing flux contamination and to reduce weld distortion in multiple internal vessels.

At Meyer Tool, we always look forward to attending PAC, and this year especially so. PAC ’11 presented the perfect opportunity to unveil our upgraded booth which highlights our Reduced Project Risk process pictorial. Meyer Tool has been reducing project risk for our customers since 1969. We are proud to highlight recently completed projects and testimonials that illustrate our Reduce Project Risk services in action. Through regular communication among all project participants: customer, engineering, fabrication specialists on our shop floor and suppliers, Meyer Tool invokes a spirit of trust/continuity, collaboration, process optimization and employee commitment and accountability into our projects which enhances our ability to Reduce Project Risk. We strive to find the “gotchas” before cutting metal to fabricate what is really needed, not just what’s on the prints or specifications. In the end, the Meyer Tool customer achieves the lowest total cost of ownership versus purchasing from those who offer an initial low cost only to add hidden costs as they surface throughout the project life. After all, as our “Meyer Tool blue” fortune cookies so aptly express “Partner with Meyer Tool to Reduce Project Risk and all your project dreams will come true!”

​Often, a benefit of these engagements is that those who were once just business acquaintances are now also considered friends. We certainly look forward to the opportunity to catch up with all the familiar, friendly faces we’ve come to know and respect through our attendance at PAC. We enjoy the chance to meet new faces as well; ones that we hope to know, befriend and engage with in the years and projects to come. So, thanks to all who hung out with us during PAC‘11 week. We look forward to seeing you again soon!

Picture
Meyer Tool’s booth at PAC '11.
Picture
Eileen Cunningham and Ed Bonnema at the PAC '11 booth.
Picture
Zack Conway, ANL and Eileen Cunningham, Meyer Tool at Zack's poster.
Picture
Mike Kelly, ANL and Ed Bonnema, Meyer Tool at Mike's poster.
Picture
Laurie Huget, Cryogenic Society of America and Eileen Cunningham, Meyer Tool.
Picture
Gary Cheng, Jefferson Lab and Ed Bonnema, Meyer Tool at one of Gary's posters.
Picture
Peter Ostroumov, ANL (right) and Ed Bonnema, Meyer Tool.
Picture
Bruce Strauss of the Department of Energy at Meyer Tool’s booth.
Picture
Doug Holmes and Joe Deacutis of Advanced Energy Systems with Ed Bonnema, Meyer Tool, and Meyer Tool’s poster.

Company Information

About Meyer Tool
Careers
Newsletter

Proud Member

Picture

Contact Us

Phone: 708-425-9080
Fax: 708-425-2612
Address: 4601 W. Southwest Highway, Oak Lawn, IL, 60453
​
​Request a Quote

Links

Home
Services
Products
Experience
Education
​Contact
Why Meyer Tool?

Stay Connected

© COPYRIGHT 2022. ALL RIGHTS RESERVED.