Call: 708-425-9080

Customer Testimonials

Honest Feedback - Trusted Supplier - Industry Leading Customers

We pride ourselves on exceeding customer expectations.

Quality is never sacrificed and we will always do what it takes to ensure that  all products leave the shop with impeccable attention to detail.  We will re-polish, re-machine, re-test, re-measure, and re-check any product attribute that is questionable.  

We are a trusted supplier to some of the most advanced research and technology companies across the United States and around the world.

We have collected a long list of positive testimonials from engineers, scientists, and procurement customers from within the organizations we serve.    These top professionals can attest to the superior level of quality and personal service we provide.

"The parts we received looked great! Your project engineer – Zack, was an excellent communicator and very responsive to our needs. He always followed up within a few hours of receiving an email and gave our organization anything that was required throughout the fabrication process. We greatly appreciate you not shipping to us while we were in government shutdown mode."

          - Fabrications Operations Support Assistant at Government Aerospace Facility

"We were delighted with our experience of buying from your company. We especially appreciated the effort to ship on time despite your severe weather event, and your helpful communications with our shipper. "

          - Lee Kenny, Chase Cryogenics

"We’ve always been happy with Meyer Tool. The project engineer I worked with was very responsive to our requests and I enjoyed working with him."

​          - Mechanical Engineer, Fermi National Accelerator Laboratory

"We asked for very tight tolerances and the project engineer we worked with was very responsive throughout the process. He added great advice regarding the fabrication process. My team is very happy with the results."

          - Rare Event Detection Group, Lawrence Livermore National Laboratory

"You Rank 4.5 out of 5 stars in terms of service. We are always satisfied with your product and Meyer is always on our short list for anything related to cryogenics." 

          - Support Specialist, Cornell University

“I strongly recommend Meyer Tool for your project. The quality of Meyer Tool’s staff is excellent from project management to technicians on the shop floor. Meyer Tool was very responsive and completed the job on schedule against many odds.” 

          -Joseph Rasson, Project Director of the LHC Project at CERN, Switzerland

“Good customer interaction, Meyer is willing to modify the design to save production time, money and improve quality.”

          -University of Florida

“Meyer’s level of quality is excellent and their pricing is very competitive.”

          -Linde AG

"​The whole team at Meyer has been a delight to work with.  My team and I are grateful for the excellent service and support."

          -Atlas Tool

"We recognize Meyer Tool for your exemplary support of the 12GeV Continuous Electron Beam Accelerator Facility upgrade." ​

          -Jefferson Lab

“Few vendors have Meyer’s level of experience in precision fabrication nor their ability to solve problems.”

          -University of Rochester

“We appreciate Meyer’s thoroughness of work. They hold to a high standard of quality.”

          -University of Arizona

“What stands out about Meyer Tool is their flexibility and engineering support.”

          -Nanophase  Technology

“Cooperative and responsive are words that identify Meyer.”

          -Cornell University

“Meyer Tool has the knowledge and experience needed to get the job done.”

          -Argonne National Laboratory

“We did a parallel job with another company. The other company started three weeks earlier, Meyer beat their time and with a higher level of quality.”

          -Ion Beam Applications

“We consider Meyer Tool to be one of our best suppliers and team mates. MTM is always in the front of our mind when we look at new opportunities.”  

          -Advanced Energy Systems

“The considerable input we got from Meyer on the assembly helped us come up with a better design.”

          -Tom Peterson, Fermilab Cryogenics Engineer

“Meyer has an excellent working relationship with Fermilab and Berkeley Lab. Because of the success that we are seeing today, we have confidence that Meyer will deliver the remainder of the boxes on schedule and budget.”

          -Bruce Strauss, U.S. Department of Energy

“The boxes are a major component of the LHC, and we are extremely fortunate that Meyer got involved. The skills Meyer brought to the project were important in getting the job done. I don’t know how we would have pulled this off without Meyer.”

          -Jim Kerby, Fermilab Engineer

“You guys (Meyer) did a great job on these scan horns and everyone is so impressed by their functionality and stunning looks. We love them.” 

​          -Kelvin Fitzgerald, Sterigenics

“In short, Meyer Tool did an outstanding job from all aspects of the project. You will be hard pressed to find a better company from quality to responsiveness.”

          -Joseph Rasson, Lawrence Berkeley National Laboratory

“Meyer Tool was very responsive and completed the job on schedule against many odds.”

          -Joseph Rasson, Lawrence Berkeley National Laboratory

“The quality of Meyer Tool’s staff is excellent from project management to technicians on the shop floor. We were especially lucky to have Ed Bonnema as our project manager at MTM. He is an outstanding engineer.”

          -Joseph Rasson, Lawrence Berkeley National Laboratory

“Thank you for working through all the issues, I only wish your facility was closer to accommodate the future changes. I have made a point to express my feelings of your fine work to the managers.  I hope to do business with you in the future.” 

          -Robert Stremke, General Atomics

“That’s why I went with you guys, you know what you’re doing. Thanks!”

          -Stephen MacDonald, Argonne National Laboratory

“I purchase from Meyer because they have an excellent track record for producing a good product at a fair price and the service has always been friendly and honest.”

          -Mike McDonald, Lawrence Livermore National Laboratory

“Price and quality of work”

          -Ron Evans, Fermilab

“Their experience with cryo-vessels and cost.”

          -Eric Chojnacki, Cornell University

“Cost, quality, delivery”

          -Oscar Raffo, University of Rochester

“Can do what I need done.”

          -Joseph Tabeling, U.S. Applied Diamond

“The parts we ordered needed complex heat treatment Meyer tool had done before - they were able to get the product made with only basic specs from me.”

          -Chad Rumchik, Eglin Air Force Base

“Good quality.”

          -Sue Hucek-Armstrong, Lawrence Livermore National Laboratory

“Because of the great quality and service.”

           -Kelvin Fitzgerald, Sterigenics

“Meyer tool provides a quality product that they stand behind.  They also provide these products in a timely manner.”

          -Jim Jones, Linde

“Thanks and great job to your team – again!”

           -Mike Salo, TPI Systems

“In summary, you guys are great to work with. Easy to talk to, knowledgeable, and responsive.”

           -Mike Salo, TPI Systems

“I have heard adjectives like “magnificent” used to describe the larger shell sections.”

           -Tim Rennick, University of Chicago

"Our QA department was very pleased with the look & quality of the workmanship on our project. It passed all of our internal checks & tests as well." 

           -Jefferson Lab

“What I appreciate most is your working with us as a partner on projects to solve the problems that inevitably come up in the unique type of work that we do.”

           -Tom Peterson, Fermilab

“Meyer continues to be one of our best suppliers. I will continue to recommend Meyer to all who ask. Meyer continues to be a company of the highest integrity.”

           -Dennis Rankin, Lawrence Livermore National Laboratory

“Meyer is very responsive to customer needs.”

          -Dale Jose, Lawrence Livermore National Laboratory

“The craftsmanship is excellent, and the folks at Meyer are very experienced and easy to work with.”

​          -Robert Austin, Constellation Technology

“Meyer’s people are very helpful and willing to work with us in producing a very good product.”

          -Doug Holmes, Advanced Energy Systems

“Ability to communicate rapidly and directly with MTM Staff is very valuable. Ability to tap MTM judgment, advice and experience improves our designs and saves us time and money.”

          -Joel Fuerst, Argonne National Laboratory

“Do not lower your quality, your products have always had very good quality and we have had no problems with your products.” 

          -Ruben Dominguez, University of Arizona

"Meyer has earned our trust and we all know your capability" 

          -Gary Cheng, Jefferson Lab